Sliding Barn Doors

Bесаuѕе оf thеіr flexibility, sliding barn doors hаvе bесоmе famous nowadays.

There are various materials you can use to construct these doors; nonetheless, it is recommended to use heavy and tough materials when installing sliding doors.

Sliding Barn Doors

Moreover, ensure that the material you are going to use is hard-wearing and can take weather changes.

sliding barn doors

How to Construct Sliding Doors?

The following are the steps that you have to perform in order to build the right and functional sliding door for your barn.

1. Acquire the Materials and Tools

The first step on building sliding barn doors is to purchase all the supplies and tools that you’ll need: Boards, Saw, Planks, Screws, Power Drivers, Metal Braces, Hammer and Nails.

2. Get Down the Measurements

The next step is to get the measurements of your desired door frame. Through the use of a measuring tape, know the length and width of the door frame you want to construct then list them down on any paper.

installing sliding barn doors

While listing the measurements, think through as well the design of the door.

3. Cut the Boards

Cut the board for the frame by following the measurement you have listed down. Depending on the mass and strength of the sliding barn doors you want, use two or more pile of wood beams.

4. Pull together the Frame

You require galvanized screws, nails and metal braces to put together the door. The door can have more firmness if a crossed cut brace will be set up in the midpoint of the frame.

barn door track system

If for instance you have a larger door, then you need two frames which will suit two halves of the door.

5. Plank the door

The next step is to begin planking the door. Use a saw to cut the planks to the desired height of the door; then, properly put it unto the door frame. With the use of the screws, nails, wood glue attach the planks to the frame.

sliding door handles

6. Escalate the Track and Wheels

A very significant task to do in terms of sliding barn doors is the escalation of the track and wheels; this is because this will actually make the door to slide.

You have to raise the track over the top of the frame with the use of carpenter level, power driver and wood screw. You also have to mount the wheels on the bottom of the barn door.

7. Mount Wall Tracks

This will be the last procedure in the installation of sliding barn doors. Given the measurement of the frame, put in the same length tracks unto the barn walls where they drawback.

These are the main procedures in installing sliding barn doors without the need of much effort. In order to improve the beauty of the door, you can paint it attractively depending on what you wish.

You may also want to paint your name on it for identity. What are you waiting for? Start building your sliding barn door to make your barn be more attractive!

Some pictures related to sliding barn doors:

exterior sliding barn doors

hanging sliding barn doors

modern sliding doors

sliding glass door hardware

roll up garage doors

sliding barn door kit

Leave a Reply